42 CHAPTER 4: RUNNING THE SETUP WIZARD
PPPoA
To set up the Router for use with a PPP over ATM (PPPoA) connection, use
the following procedure:
Figure 28 PPPoA Screen
1 Enter your user name in the Username field.
2 Enter your password in the Password field.
3 Re-type your password in the Retype Password field.
4 Enter your VPI and VCI information in the VPI/VCI fields.
5 Select the encapsulation type (LLC or VC MUX) in the Encapsulation
drop-down menu. This information should be provided to you by your ISP.
Check all of your settings, and then click Next.
The LAN Settings screen will then be displayed (refer to Figure 32).
To Next Page
Loading...
