3DGence DOUBLE P255 - maintenance activities | version 07.2021
7. LUBRICATION OF GUIDES AND TRAPEZOID BOLT
Recommended frequency: every four months.
1. Before you start to lubricate, please obtain:
- Grease SKF LGEP 2 (grease according to norm DIN 51825 or class K2K),
- a manual lubricator (Fig.71).
Fig.71 Manual lubricator
2. Choose the appropriate grease:
-for trapezoid that aren’t equipped with grease nipples and for linear guides:
• Grease SKF LGEP 2 (Fig.72)
Fig. 72 Grease SKF LGEP 2
3. Fill the lubricator with the appropriate grease according to the manufacturer’s instructions.
To Next Page
Loading...
