22
Status Indicators
Low battery, automatic landing
Loss of RC signal, automatic landing
Pre-arm safety check failure—connect to a ground station
and see the troubleshooting section
Loss of GPS signal, switch to standard mode (altitude hold)
Initializing, hold the X8 still and level
Acquiring GPS, please wait
Armed
Autopilot ready, GPS locked
Status LED
The Pixhawk LED indicates the status of the X8. During flight, the LED won’t
be visible; instead, use a ground station to view the status of the X8. Visit
3DR.com/X8/info to listen to Pixhawk’s status tones.
X8 Status LED
LED
To Next Page
Loading...
