How to fix a red charge level display on a 3M ESPE Elipar DeepCure-S Dental equipment handpiece?
If the charge level display on your 3M ESPE handpiece glows red steadily, it means the remaining battery charge is only adequate for a few typical exposure cycles. Place the handpiece in the charger and recharge the battery.
Why is the charger LED glowing red on my 3M ESPE Elipar DeepCure-S Dental equipment?
If the LED showing the operating status in the charger of your 3M ESPE dental equipment glows red steadily, it indicates that the charge contact pins in either the handpiece or the charger are wet. Dry the charge contact pins, being careful not to bend the flexible charge contact pins in the charger.
Why is the power level display of my 3M ESPE Elipar DeepCure-S handpiece flashing red in the charger?
If the power level display of your 3M ESPE Dental equipment handpiece flashes red while in the charger, it indicates a charging problem. This usually means the battery is defective or has reached the end of its life. The suggested solution is to replace the battery.
How to fix a 3M ESPE Dental equipment handpiece when the charge level display glows red?
If the charge level display on your 3M ESPE Dental equipment handpiece glows red steadily, it means the remaining battery charge is only enough for about 5 to 10 typical 10-second exposure cycles. To resolve this, place the handpiece in the charger and recharge the battery.
Why is the power level display flashing red on my 3M ESPE dental equipment?
If the power level display of your 3M ESPE dental equipment handpiece flashes red, it indicates that the battery lacks sufficient charge. Place the handpiece in the charger and recharge the battery.
What to do if 3M ESPE Elipar DeepCure-S won't turn on after long storage?
If the 3M ESPE dental equipment handpiece has not been used for a long time and now it cannot be turned on, it is likely that the battery does not have enough charge. Place the handpiece in the charger and recharge the battery.
Why is the power level display flashing red while charging 3M ESPE Elipar DeepCure-S Dental equipment?
If the power level display of your 3M ESPE dental equipment handpiece flashes red while it is in the charger, it indicates a charging problem. The battery may be defective or at the end of its useful life. Replace the battery.
What does alternately red and green LED flashing mean on 3M ESPE Elipar DeepCure-S charger?
If the LED showing the operating status in the charger flashes alternately red and green while the 3M ESPE dental equipment handpiece is in the charger, it indicates a malfunction during charging, and the battery may be damaged. Replace the battery.
Why isn't the charger LED on for my 3M ESPE Elipar DeepCure-S Dental equipment?
If the LED showing the operating status in the charger of your 3M ESPE dental equipment does not come on even when the plug is connected to an electrical outlet, the power outlet may not be providing any voltage. Try using a different power outlet.
What to do if my 3M ESPE Elipar DeepCure-S Dental equipment handpiece won't turn on after not being used for a while?
If your 3M ESPE Dental equipment handpiece has not been used for a long time and now it cannot be turned on, it is likely that the battery does not have enough charge. To resolve this, place the handpiece in the charger and recharge the battery.
Describes the default configuration settings of the unit.
Outlines the first actions required for setup and use.
How to choose and set the desired curing time.
Explains the indicator for the handpiece's power status.
Instructions on how to turn the curing light on and off.
Guidance on optimal placement of the light guide for effective curing.
Procedure to verify the output intensity of the light.
Best practices for using the device with specific dental adhesives.
Explains the automatic power-saving mode of the handpiece.
Details the audible alerts emitted by the handpiece.
Steps for handling the device's rechargeable battery.
Guidelines for maintaining the handpiece and battery.
Instructions for cleaning and sterilizing the light guide.
How to package the light guide for sterilization.
Details on effective methods for sterilizing the light guide.
General| Brand | 3M ESPE |
|---|---|
| Model | Elipar DeepCure-S |
| Category | Dental equipment |
| Language | English |
To Next Page
