To Next PageTo Next Page
Need help?Do you have a question about the 3M ESPE Elipar and is the answer not in the manual?
General| Light Source | LED |
|---|---|
| Light Intensity | 1200 mW/cm² |
| Curing Time | 5-20 seconds |
| Timer Settings | 5, 10, 15, 20 seconds |
| Battery Type | Lithium-ion |
| Curing Modes | Standard |
| Light Guide Tip Diameter | 8 mm |
Technical specifications for the Elipar charger, including operating voltage and consumption.
Technical specifications for the Elipar handpiece, including power supply and wavelength.
Details the default factory settings of the Elipar device, such as exposure time.
Guidance on the initial setup procedures for the device, including charger and handpiece.
Instructions on how to select and adjust the exposure time using the device's controls.
Procedures for turning the curing light on and off, including tack-cure function.
Steps for attaching and detaching the light guide from the handpiece securely.
Guidance on how to position the light guide for optimal light intensity during use.
Method for checking the light intensity output of the curing light using composite disks.
Instructions for cleaning and maintaining the handpiece, emphasizing charger use and avoiding immersion.
Procedures for cleaning and disinfecting the light guide, including material resistance and sterilization limits.
Detailed steps for manual cleaning and disinfection of the light guide using specific solutions.
Information on using automatic cleaning and disinfection devices for the equipment.
Guidelines for sterilization, including maximum temperature and time for steam sterilization.
Procedure for checking the light guide for damage or contamination before use.
Instructions for cleaning the handpiece and glare shield using mild cleaning agents.
Recommendations for storing the handpiece when not in use for extended periods to maintain battery.
User responsibilities for collecting old electric and electronic equipment separately from household waste.
Information on disposal facilities and procedures for the Elipar device after its usable life.
Steps for safely removing the battery from the device for proper disposal.
Explanation of symbols related to the disposal of electric and electronic devices.
