3M 1 Piece - Piece (Gen 4) Self Test

41
1 Piece
1 Piece 1 Piece
1 Piece (Gen 4)
(Gen 4)(Gen 4)
(Gen 4) SELF TEST
SELF TESTSELF TEST
SELF TEST
To Begin the 1 Piece (Gen 4) Self Test:
• Make sure the 1 Piece (Gen 4) is unassigned from any
offenders
• Make sure the 1 Piece (Gen 4) does NOT have a strap with a pin tray in it
• Make sure that the 1 Piece (Gen 4) is in a good wireless and GPS location
• Press and hold the Activate Button until the 1 Piece (Gen 4) vibrates (about 5
seconds)
• The PWR/ZONE/GPS LEDs will begin to blink green, verifying the test is in
progress
• Only the Zone and GPS LEDs will be utilized for the test
• The test results will be displayed on the Zone/GPS LEDs within 10 minutes
• To stop the test, press and hold the Activate button until it vibrates
.
Test Results:
• ZONE/GPS LED solid green
g
reengreen
green = passed all tests.
• ZONE/GPS LED blinking red
redred
red ONE time = Modem Failure.
• ZONE/GPS LED blinking red
redred
red TWICE = GPS Failure.
• ZONE/GPS LED blinking red
redred
red THREE times = Tamper Failure.
• The test results will be displayed on the Zone/GPS LEDs for one hour.