EasyManuals Logo

3M 3MRO40101A Installation And Operating Instructions

3M 3MRO40101A
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
SAFETY INFORMATION
Read, understand and follow all safety information contained in these instructions prior to installation and use of
the 3MRO401 Reverse Osmosis Drinking Water Filtration System. Retain these instructions for future reference.
Intended use:
The 3M
Reverse Osmosis Drinking Water System (Model 3MRO401) is intended for use in filtering potable water and
has not been evaluated for other uses. The product is installed at the point of use and must be installed as specified in
the installation instruction by a qualified professional.
EXPLANATION OF SIGNAL WORD CONSEQUENCES
WARNING
CAUTION
NOTICE
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious
injury and/or property damage.
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate
injury and/or property damage.
Indicates a potentially hazardous situation, which, if not avoided, may result in property damage.
2
WARNING
To reduce the risk associated with choking:
•Do not allow children under 3 years of age to have access to small parts during the installation of this product.
To reduce the risk associated with ingestion of contaminants:
•Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before
or after the system. Systems certified for cyst reduction may be used on disinfected water that may contain filter-
able cysts. EPA Establishment #070595-CT-001
To reduce the risk associated with a hazardous voltage due to an installer drilling through existing electric wiring
or water pipes in the area of installation:
•Do not install near electric wiring or piping which may be in path of a drilling tool when selecting the position to
mount the filter bracket.
To reduce the risk of physical injury:
•De-pressurizesystemasshowninmanualpriortocartridgeremoval.
To reduce the risk associated with a hazardous voltage:
•Ifthehomeelectricalsystemrequiresuseofthecoldwatersystemasanelectricalsafetyground,ajumpermust
be used to ensure a sufficient ground connection across the filter installation piping — refer installation to quali-
fied personnel.
•Do not use the Filter if the power cord is damaged — contact qualified service personnel for repair.
To reduce the risk associated with back strain:
•Followsafeliftingprocedures.

Other manuals for 3M 3MRO40101A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the 3M 3MRO40101A and is the answer not in the manual?

3M 3MRO40101A Specifications

General IconGeneral
Brand3M
Model3MRO40101A
CategoryWater Filtration Systems
LanguageEnglish

Related product manuals