3M 8511 User Manual

IMPORTANT
Before use, wearer must read and understand these User
Particles such as those from grinding, sanding, sweeping, sawing,
bagging, or processing minerals, coal, iron ore, flour, metal, wood,
pollen, and certain other substances. Liquid or non-oil based
particles from sprays that do not also emit oil aerosols or vapors.
Follow all applicable local regulations. For additional information
on 3M use recommendations for this class of respirator please
consult the 3M Respirator Selection Guide found on the 3M
Personal Safety Division web site at www.3M.com/PPESafety or call
1-800-243-
-800-267-4414.
Do not use for gases and vapors, oil aerosols, asbestos, or
sandblasting; particulate concentrations that exceed either 10
times the occupational exposure limit or applicable government
regulations, whichever is lower. In the U.S., do not use when the
Occupational Safety and Health Administration (OSHA) substance
specific standards, such as those for, arsenic, cadmium, lead in the
construction industry, or 4,4’-methylene dianiline (MDA), specify
other types of respiratory protection. This respirator does not

3M 8511 Specifications

General

Filter Class	N95
Valve	Yes
Strap Attachment Type	Stapled
Protection Level	N95
Strap Type	Braided
Adjustable Nose Clip	Yes
Standards/Approvals	NIOSH approved
Respirator Style	Cup
Filter Efficiency	≥95%
Filter Type	Particulate
Fluid Resistance	No
Use	Single Use
Product Type	Respirator
Product Name	3M™ Particulate Respirator 8511
Comfort Features	Cool Flow™ Valve
Applications	Grinding, Sanding, Sweeping, Bagging