3M 8511 User Manual

6. Inspect respirator before each use to ensure that it is in good
operating condition. Examine all the respirator parts for signs
of damage including the two headbands, staples, exhalation
valve and noseclip. The respirator should be disposed of
immediately upon observation of damaged or missing parts.
Filtering facepieces are to be inspected prior to each use to
assure there are no holes in the breathing zone other than
the punctures around staples and no damage has occurred.
Enlarged holes resulting from ripped or torn filter material
around staple punctures are considered damage. Immediately
NIOSH approval.
7. Conduct a user seal check before use as specified in the Fitting
Instructions section. If you cannot achieve a proper seal, do
not use the respirator.
8. Dispose of used product in accordance with
1. This respirator does not supply oxygen. Do not use in

3M 8511 Specifications

General

Filter Class	N95
Valve	Yes
Strap Attachment Type	Stapled
Protection Level	N95
Strap Type	Braided
Adjustable Nose Clip	Yes
Standards/Approvals	NIOSH approved
Respirator Style	Cup
Filter Efficiency	≥95%
Filter Type	Particulate
Fluid Resistance	No
Use	Single Use
Product Type	Respirator
Product Name	3M™ Particulate Respirator 8511
Comfort Features	Cool Flow™ Valve
Applications	Grinding, Sanding, Sweeping, Bagging