Need help?Do you have a question about the 3M Accuspray HGP Spray Gun and is the answer not in the manual?
General| Operating Pressure | 20 psi |
|---|---|
| Nozzle Size | 1.8 mm |
| Fluid Tip Size | 1.8 mm |
| Air Inlet | 1/4 inch |
| Air Pressure | 20 psi |
Specifies the professional use of the spray gun and atomizing heads for production needs.
Explains the meaning and potential outcomes of warning and caution symbols.
Covers risks from product misuse, chemical exposure, fire, explosion, and noise.
Details safety measures for tripping, falling, tipping, and hazardous air pressure.
Addresses risks from impact, sharp points, muscle strain, property damage, and environmental contamination.
Instructions for unpacking the spray gun kit and inspecting for damage or missing items.
Details the specific features and specifications of the 3M™ Accuspray™ Spray Gun model.
Step-by-step guide for securely attaching the atomizing head to the spray gun body.
Instructions for connecting air fittings, regulators, or control valves to the spray gun.
Guidance on how to adjust the fluid flow rate using the fluid needle adjustment knob.
Information on setting the appropriate air inlet pressure for optimal spraying.
Instructions for adjusting the fan pattern size using the fan adjustment knob.
Detailed steps for flushing the spray gun with solvent or water after use.
Guidance on cleaning and proper disposal of used atomizing heads according to regulations.
To Next Page
