Why is my 3M Paint Sprayer gun leaking fluid behind the trigger?
If your 3M Paint Sprayer is leaking fluid behind the trigger, the cause may be the atomizing head seals. To resolve this, replace the atomizing head and clean the needle.
What to do if new atomizing head is leaking fluid on my 3M Paint Sprayer?
If a new atomizing head is leaking fluid, it is likely due to scored seals in the atomizing head. To fix this, clean the needle and replace the atomizing head.
Why is air leaking around the atomizing head seal on my 3M Paint Sprayer?
Air leaking around the atomizing head seal is caused by the atomizing head not being secured in the latches. Remove the atomizing head and reattach it to the gun body, ensuring you hear a double click.
How to fix trigger sticking on 3M Paint Sprayer?
A sticking trigger on your 3M Paint Sprayer is often due to a dirty needle. Clean the needle to resolve this issue.
What to do if I can't hear double click when attaching atomizing head on my 3M Paint Sprayer?
If you cannot hear the double click when attaching the atomizing head, the latch tabs on the atomizing head may be frayed. Replace the atomizing head.
Why won’t the atomizing head stay on my 3M Paint Sprayer gun?
If the atomizing head won’t stay on the gun, the latch tabs on the atomizing head are likely frayed. Replace the atomizing head.
Why is my 3M Paint Sprayer gun leaking fluid in the gun holder?
If your 3M Paint Sprayer gun is leaking fluid in the gun holder, it might be due to using the wrong gun holder or support. Use the 3M gun hanger PN 16236.
Why is my 3M Paint Sprayer gun body leaking air behind the trigger?
If the gun body is leaking air behind the trigger, it's likely due to a bad poppet seal. Replace the gun: Call 1-877-MMM-CARS or (1-877-666-2277).
Specifies the professional use of the spray gun for quality application.
Details the meaning and impact of safety warning symbols.
Instructions for removing and inspecting components from the product box.
Procedure for securely connecting the atomizing head to the spray gun body.
Instructions for connecting air supply components to the spray gun inlet.
Using color clips to identify different spray gun applications.
Steps for preparing and attaching the PPS paint preparation system.
Guidance on adjusting air pressure for optimal spray performance.
How to adjust the fluid needle for controlling material output.
Method for changing the spray pattern shape using the fan adjustment knob.
General| Cup Capacity | 600 ml |
|---|---|
| Fluid Delivery | Gravity Feed |
| Type | HVLP |
| Nozzle Sizes | 1.8 mm |
| Material Compatibility | Paints |
| Application | Automotive, woodworking |
| Power Source | Air Compressor |
To Next Page
