3M Accuspray - 3 M Accuspray Spray Gun Safety Statements; Intended Use; Explanation of Safety Symbols Consequences

4
3M™Accuspray™ SprayGun SafetyStatements
Read, understand and follow all safety information contained in these instructions prior to set up and operation
of any 3M™ Accuspray™ Spray Gun. Retain these instructions for future reference. Refer to the applicable Safety
Data Sheet and material container label for each material to be sprayed before using this 3Mequipment.
IntendedUse:
The 3M™Accuspray™ SprayGun and Atomizing Heads are intended for professional use only. They are intended to deliver
the desired quality, atomization, and rate of application for larger productionneeds.
The spray gun must be set up as specifi ed in the 3M™Accuspray™ SprayGun Owner’s Manual. They are intended
for use in a professional/industrial environment only. They have not been evaluated for otheruses.
Explanation of Safety Symbols Consequences
WARNING:
Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
CAUTION:
Indicates a hazardous situation, which, if not avoided, could result in minor or moderate
injury.
WARNING
To reduce the risks associated with all hazards related to the use of thisproduct:
• Read, understand and follow all safety statements in applicable equipment owners’ manuals to avoid possible
safetyhazards.
• This equipment is to be used only by professionals familiar with the possible applicable safetyhazards.
• Do not use this product around unsupervisedchildren.
• Never modify any part of thisproduct.
• Always comply with local, state, and national codes governing ventilation, fi re protection, operation, maintenance,
andhousekeeping.
To reduce the risks associated with chemicalexposure:
• Never point a spray gun at anyone else or place any part of your body in front of the atomizinghead.
• Before use check spray equipment for damage and proper function. Repair/replace worn, damaged or
malfunctioningcomponents.
• Always wear appropriate personal protective equipment for eye, skin, respiratory and hearing protection per the
applicable MSDS and material container labels at all times whenspraying.
To reduce the risks associated with fi re andexplosion:
• Must maintain adequate ventilation per applicable MSDS and material container labels for each material being sprayed
in the workarea.
• All ignition sources such as smoking must be kept out of the sprayarea.
• Always maintain a readily available, approved fi re extinguisher or other approved fi re fi ghting equipment in the
sprayarea.
• When operating this unit, only use undamaged, suitably solvent-resistant and appropriately pressure-rated static-
conductive air hoses.
• Prior to painting, users are expected to be appropriately grounded (by either shoes or heel straps) and should wear
static-dissipative or static-conductive gloves.
To reduce the risk associated withnoise:
• Always wear hearing protection while using the spray gun.