3M Air-Mate PAPR 231-01-30 User Manual

1
Air-Mate™ Belt-Mounted High Efficiency
Powered Air Purifying Respirator
User Instructions for Air-Mate™ PAPR Assembly 231-01-30
and Air-Mate™ PAPR Unit 520-03-63R01
(Keep these User Instructions for reference)
This product helps protect against certain airborne particles. Misuse may result in
sickness or death. For proper use, see supervisor, User Instructions, or call 3M in
U.S.A., 1-800-243-4630. In Canada, call Technical Service at 1-800-267-4414.

3M Air-Mate PAPR 231-01-30 Specifications

General

Product Type	Powered Air Purifying Respirator (PAPR)
Model	231-01-30
Battery Runtime	8 hours
Standards	Meets NIOSH standards
Battery Type	NiMH (Nickel Metal Hydride)
Filter Compatibility	3M filters
Headgear Compatibility	3M headgear

Summary

GENERAL SAFETY INFORMATION

Intended Use

Defines the intended application and purpose of the Air-Mate PAPR system for respiratory protection.

Warnings and Cautions Summary

Highlights critical warnings and cautions for safe and effective use of the respirator.

USE INSTRUCTIONS AND LIMITATIONS

Proper Use and Prohibited Uses

Details what the respirator is designed for and environments/conditions where it should not be used.

Respirator Selection and Training Requirements

Outlines criteria for selecting the correct respirator and necessary training for users.

NIOSH Approval and Specifications

Assigned Protection Factor (APF)

Information on the protection factor assigned to the respirator system and headpieces.

NIOSH Approval Details

Provides information regarding the NIOSH approval for the PAPR system components and limitations.

Product Specifications

Lists technical specifications including heat/flame resistance, battery pack, and weight.

SYSTEM COMPONENTS AND REPLACEMENT PARTS

3M™ Components and Replacement Parts List

Lists product numbers and descriptions for all PAPR system components and available replacement parts.

NIOSH-Approved System Configurations

3M™ Accessories

Lists available 3M accessories compatible with the PAPR system, such as belts and chargers.

ASSEMBLY AND BATTERY MANAGEMENT

Breathing Tube Connection

Instructions for connecting the breathing tube to the PAPR unit and headgear.

Battery Installation Procedure

Step-by-step guide for installing the battery pack into the PAPR unit.

Battery Charging Guidelines

Detailed instructions and recommendations for charging the PAPR battery pack.

Filter and Gasket Maintenance

Filter and Gasket Replacement

Procedures for changing the high efficiency filter and gasket, including removal and replacement steps.

INSPECTION AND PERFORMANCE CHECKS

Pre-Use Inspection Checklist

A step-by-step guide for inspecting the PAPR unit and its components before each use.

User Performance Check Procedure

Instructions on how to perform a user performance check to ensure proper airflow.

DONNING THE PAPR

Step-by-Step Donning Instructions

Guide on how to properly don the complete PAPR assembly onto the user.

OPERATING INSTRUCTIONS

Safe Operation in Contaminated Areas

Procedures for operating the PAPR unit within a contaminated area and exiting safely.

CLEANING AND STORAGE

Cleaning Procedures

Recommended methods for cleaning the PAPR unit, battery pack, and breathing tube.

Storage Recommendations

Guidelines for storing the respirator at room temperature in a dry, protected area.

TROUBLESHOOTING

Common Problems and Solutions

A table outlining common issues, their possible causes, and corrective actions.

IMPORTANT NOTICE AND CONTACT INFORMATION

Warranty and Liability Information

Details the warranty terms, exclusions, and limitations of liability for the product.

Contact and Further Information

Provides contact details for technical assistance and additional product information.