To Next PageTo Next Page
Need help?Do you have a question about the 3M 7501 and is the answer not in the manual?
General| Brand | 3M |
|---|---|
| Model | 7501 |
| Category | Respiratory Product |
| Language | English |
Highlights key attributes like patented valve, flexible filter system, soft silicone, drop-down feature, and improved head harness.
Lists particulate filters with hazard ratings and corresponding industrial applications for various dusts and mists.
Details gas/vapour filters, their hazards, and industry uses, including specific gases and protection levels.
Specifies materials for facepiece, head harness, filter holder, and valves, noting silicone rubber and polyethylene.
Details CE marking and compliance with European Directives and standards for facepieces and filters.
Explains proper usage with gas/vapour and particulate filters, including protection factors and WEL limits.
Provides guidelines for cleaning the respirator, inspecting components, and storing it safely after use.
Outlines steps for fitting the respirator, including standard and drop-down suspension methods.
Describes how to attach and adjust straps for both standard and drop-down suspension types.
Details positive and negative pressure face fit checks to ensure a proper seal and prevent leaks.
Specifies the need for fit testing for tight-fitting facepieces as per COSHH regulations.
Lists part numbers and descriptions for replacement components like head harness and filter holders.
Covers crucial limitations, including oxygen deficiency, unknown contaminants, and modification prohibitions.
Emphasizes that protection is effective only if correctly selected, fitted, and worn.
