(English)
3
• The nature of the tested surface will also aect the results. For example, heavily scored surfaces will tend to provide
higher results.
For detailed advice on interpretation of results and a full explanation of how to implement the technique, consult
the “3M™ Hygiene Management Guide.” This system establishes reference levels obtained from normal cleaning
procedures to set pass/fail 3M Clean-Trace Surface ATP readings.
Explanation of Symbols
Attention, see instructions for use
The lot in a box and the hourglass symbols represent the lot number and expiry date. The lot in a box is
followed by the lot number: (621/Y1). The hourglass is followed by a day, month and year which represents the
expiry date (day, month and year: 21JUN 2012
Store between given temperatures
Protect from direct sunlight
To Next Page
