3M DX70i - Connecting the Projector; Connect the Computer;Notebook

12 3M
™
Digital Projector DX70i Product Safety Guide © 2008 3M
ENGLISH
Replacing the Lamp Cartridge
D WARNING
To reduce the risk associated with environmental contamination due to
mercury:
s(G,AMPINTHISPRODUCTCONTAINSMERCURY$ISPOSEOFLAMPCARTRIDGEIN
accordance with applicable federal, state and local regulations.
To reduce the risk associated with exposure to hazardous voltage:
s$ISCONNECTPOWERCORDWHENTHEPROJECTORISNOTINUSEDURINGLAMP
replacement, and while cleaning.
s$ONOTREMOVEANYSCREWSOTHERTHANTHOSESPECIFIEDINTHELAMP
replacement instructions.
s$ONOTATTEMPTTOSERVICETHEPROJECTOR4HEREARENOUSERSERVICEABLE
parts, other than the lamp cartridge, inside the projector. Contact a 3M
authorized service provider for service.
s$ONOTALLOWWATEROROTHERLIQUIDSTOENTERTHEPROJECTOR
To reduce the risk associated with hot surface of lamp cartridge:
s5NPLUGTHEPROJECTORFROMTHEELECTRICALOUTLETANDALLOWTHELAMPTOCOOL
for 45 minutes before replacing the lamp .