3M DX70i - Page 32

32 Guide d’utilisation du vidéoprojecteur numérique DX70i de 3M
TM
– consignes de sécurité © 2008 3M
FRANÇIS
5. Use a screwdriver to remove
the 3 screws from the lamp
module.
6. Pull out the lamp module.
To replace the lamp module, reverse the previous steps.
Warning: To reduce the risk of personal injury, do not drop the lamp mod-
ule or touch the lamp bulb. The bulb may shatter and cause injury if it is
dropped.
Remplacer la cartouche de la lampe