3M Dynatel 900 Series User Manual

Operation
Section 1
Page 49
AC Line Test
RED to RING
BLACK to TIP
GREEN to GROUNDED SHIELD
Hookup:
R
B
G
Note: This chart shows the tests in order as they run for
each of three testline types in a typical AC Line Test. The
test and diagnostics may differ for your application.
GROUND
*See 3M 1020B Operators Manual for instructions.
AC LINE TEST
VOLTAGE
CURRENT
LOSS
NOISE
PWR INFLUENCE
BALANCE
DIAGNOSIS
END
OF
TEST
3M 1020
MILLIWATT STEP TONE
LOSS
LOSS
NOISE
COMMAND*
SLOPE
DIAGNOSIS
On some floating-tip
switches such as
#5 ESS, ground
resistance cannot
be measured as the
switch operates on
a floating ground.
Available in 900-T-Series test sets only:
NO STORE RESULTS? YES
EDIT TITLE
GO TO STEP
TONE OR END
END
OF
TEST
DIAGNOSIS
YES
NO
GO TO
DC LINE
TEST

3M Dynatel 900 Series Specifications

General

Brand	3M
Model	Dynatel 900 Series
Category	Test Equipment
Language	English