3M
™
Mobile Projector MP225
22 © 2012 3M. All Rights Reserved.
English
Attaching the Tripod (Optional Accessory)
The table-top tripod (optional accessory) mounts to the bottom of the projector.
Tip: The 3M MP225 Projector will attach to most camera tripods.
Cleaning the Projector
1 Turn off the projector and disconnect power and other cables.
2 Use a soft cloth, such as the 3M
™
High Performance Cleaning Cloth, to wipe
off dust. If the dust is difficult to remove, dampen the cloth with clean water
and then wipe the projector clean. Then use a clean cloth to dry the projector.
Important Note: Do not use cleaning chemicals or solvents to clean the
projector. Cleaning chemicals and solvents may cause the plastic parts to
discolor.
To Next Page
Loading...
