3M MPro120 - Connecting to a Computer

3M
™
Pocket Projector MPro120
18 © 2009 3M. All Rights Reserved.
English
Connecting to a Computer
Use the VGA-Audio cable to connect the projector to desktop computers, laptop computers,
ultra-portable computers and some personal digital assistants (PDAs). The projector supports
VGA, SVGA, XGA, and WXGA resolutions.
1 Connect the VGA Cable to the MPro120 projector.
2 Connect the VGA Cable to the computer’s video and audio outputs.
3 Set the computer resolution to one of the supported resolutions.
Description Resolution (width x height) Refresh Rate
VGA 640 x 480 60 Hz
SVGA 800 x 600 60 Hz
XGA 1024 x 768 60 Hz
WXGA 1280 x 768 60 Hz