3M MPro120 - Attaching Tripod and Cleaning

3M
™
Pocket Projector MPro120
22 © 2009 3M. All Rights Reserved.
English
Attaching the Tripod
The projector includes a table top tripod that mounts to the bottom of the projector.
Tip: The 3M MPro120 will attach to most camera tripods.
Cleaning Projector
1 Turn off the projector and disconnect power and other cables.
2 Use a soft cloth such as the 3M
™
High Performance Cleaning Cloth to wipe off dust.
If the dust is difficult to remove, dampen the cloth with clean water and then wipe the
projector clean. Then use a clean cloth to dry the projector.
Important Note: Do not use cleaning chemicals or solvents to clean the projector.
Cleaning chemicals and solvents may cause the plastic parts to discolor.