EasyManuals Logo

3M PELTOR WS LiteCom Pro III User Manual

3M PELTOR WS LiteCom Pro III
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
© 3M Svenska AB
Värnamo, Sweden
10.3 Technical Data, Electrical
Power:
The Intrinsic safe models is powered by a rechargeable Li-ion battery pack ("$,
"$,).
x 3.7 V, 1350 mAh
The non intrinsic safe models is powered by a rechargeable Li-ion battery pack (ACK081).
x 3.7 V, 1800 mAh
Operating Time Intrinsic safe models:
Expected operating time (according to standardized measurement) in room temperature with "$,
"$, is:
x High power: ~12 h
x Medium power: ~13 h
x Low power: ~14 h
Operating Time Non Intrinsic safe models:
Expected operating time (according to standardized measurement) in room temperature with ACK081 is:
x High power: ~16 h
x Medium power: ~17 h
x Low power: ~18h
External input:
4-pole connector for external equipment, 3M™ Peltor type J111-A
10.4 Technical data, Radio
Frequency range:
x 406.1 - 4
70 MHz
Operation mode:
x Simplex
Antenna:
x ¼ wave, integrated whip antenna, fixed to the headset
x Omni directional
x Gain: 2 dBi
Channels:
x Up to 70 channels
Channel spacing:
x 12,5 kHz and 25 kHz
Modulation:
x Analog: Max narrow 2,5 kHz (FM), Max wide 5 kHz (FM)
x Digital: 4-level FSK, 2.5 kHz max deviation.
Receiver sensitivity:
x Typical -120 dBm
Output power:
x High power: 200 mW e.r.p
x Medium power: 20 mW e.r.p
x Low power: 10 mW e.r.p

Other manuals for 3M PELTOR WS LiteCom Pro III

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the 3M PELTOR WS LiteCom Pro III and is the answer not in the manual?

3M PELTOR WS LiteCom Pro III Specifications

General IconGeneral
Brand3M
ModelPELTOR WS LiteCom Pro III
CategoryHeadsets
LanguageEnglish

Related product manuals