3M PELTOR WS LiteCom Pro III - 3 Intended Use; 4 Important

© 3M Svenska AB
Värnamo, Sweden
1 Introduction
Congratulations and thank you for choosing 3M™ PELTOR™ Communication Solutions! Welcome to the
next generation of protective communication. Additional information about the product can be found on
this link: www.3m.com/Peltor/doc
2 3M™ PELTOR™ WS™ LiteCom Pro III Headset
This document describes the following version(s):
Intrinsic safe models:
x MT73H7F4D10EU-50
x MT73H7B4D10EU-50
x MT73H7P3E4D10EU-50
x MT73H7F4D10NA-50
x MT73H7B4D10NA-50
x MT73H7P3E4D10NA-50
Non Intrinsic safe models
x MT73H7A4D10EU
x MT73H7B4D10EU
x MT73H7P3E4D10EU
x MT73H7A4D10NA
x MT73H7B4D10NA
x MT73H7P3E4D10NA
3 Intended Use
These 3M™ PELTOR™ headsets are intended to provide workers with protection against hazardous noise
levels and loud sounds while allowing the user to communicate with built-in two-way radio or Bluetooth®.
It is expected that all users read and understand the provided user instructions as well as be familiar with
the use of this device.
4 Important
Please read, understand, and follow all safety information in these instructions prior to use. Retain these
instructions for future reference. For additional information or any questions, contact 3M™ Technical
Service (contact information listed on the last page).