8
FORWARD
This instruction manual describes the installation of the Cabloc Vertical Cable Safety Systems. It should be used as part of an
employee training program as required by CE, and must be kept with the equipment.
; Installers must read and follow the manufacturer’s instructions for safety equipment used with this system.
; Follow these instructions for proper use, inspection, and maintenance of this equipment before installing this equipment.
; If this product is resold outside the original country of destination, the reseller must provide these instructions in the
language of the country in which the product will be used.
; Before using this equipment, nd the product identication information on the installation and service label and record it in
this manual.
GLOSSARY REFERENCES
Numbered Glossary References on the front cover of this instruction reference the following items:
1
Installation Instructions
2
Cabloc Vertical Cable Safety Systems
3
Standards
4
Number of notied body that performed
CE Test.
5
Number of notied body checking the manufacture of this PPE.
6
Maximum number of system users.
7
Minimum user weight, excluding tools and equipment, is 40 kg (88 lbs) and maximum user weight, including tools and
equipment, is 140 kg (310 lbs).
8
Read user instructions.
9
Warning symbol.
Cabloc Vertical Cable Safety System Components, Figure 1:
Cabloc System
A Top Bracket
B Cable
C Cable Guide
D System Tag
E Bottom Bracket
Cabloc Pro System
F Top Bracket
G Cable
H Intermediate Bracket
I Cabloc Pro
J Hex Swage Bottom Anchor
Part Lists And Part References
The parts that can comprise a typical Cabloc Vertical Cable Safety Systems are listed in the Parts List Table in this manual. Some
items may have multiple part options and part numbers. The “Description” column on the left side of the part list is associated
with one or more part numbers that can be used for installation in the columns to right. The installation situation will determine
which parts must be used.
EN
To Next Page
Loading...
