3M Scotch Pro TL1306 - Product Operation and Intended Use; Intended Application; Operating Instructions

(Figure 1) (T
1 Body: ABS plastic housing
2 Ready: Turns green when ready for use
3 Input Tray: The entrance for the object to be laminated
4 Outlet: The exit for laminated object
5 Pouch Reverse Button
6 On/Off Button: Button glows green when turned on
1 3 Mil Heat Setting
8 5 Mil Heat Setting
9 6 Mil Heat Setting
INTENDED USE
Intended Use: This laminator is designed
for use with thermal laminating pouches
for laminating paper or flat paper-like
items between two film layers. It is
intended for home, home office or small
office use. Items not intended for use
with the laminator include: currency,
Social Security cards, thermal papers,
stamps, credit cards, cards with a
magnetic strip and other similar items.
Also, do not use with sharp objects,
unbeatable plastic, historically
significant papers or one-of-a-kind
items.
OPERATING
INSTRUCTIONS
See Figure 1 for feature references
1. Place the laminator on a flat, secure,
stable surface.
2. Open the input tray and fully extend
the tray by pulling up and outward
until the tray clicks into the stops.
3. Plug the power cord into a standard
120 V outlet.
4. Press the Power button. The power
button will glow green and the heat
setting button will glow white.