3M Scotch TL901 User Manual

l.
GEI,IEML
USE
IilSTBUCTToNS
Use 3 to l0 milthick pouches.
The laminator
is designed
to work with pouches
that
are a minimum
of 3 mils
(1
mil
=
0.001 inches) and
a maximum
of 10 mils thick.
Using
pouches
that are
thinner or thicker
may cause
jamming
or
differcnce in
quality
(ex.
bubbling).
If the laminator
is turned
on and
has not been
used
for more
than one hour.
excessive
heat may have
been
created in the
machine.
To avoid
ovefieating
and its
consequent
inferior
laminating
rcsult, inse(
a
piece
of copy
paper
into
the
machine
to remove the
excessive
heat before
your
formal laminating.
If white spots appear
or the laminated pouch
appears hazy, send
the item,
sealed end first, through
the
laminator
again.
Items have
to be laminated
on both sides.
One side
lamination
may cause the
film to be rolled
into the
machine making
it unusable.
DO NOT
insert the open end
of the
pouch
into the machine
to
prevent
it ftom being rolled
into the machine.
CARE AIID
MAll{IElrlAI{CE
Wait for laminator
to cool
down and unplug
before
cleaning. Wipe
exterior
of laminator with
cloth
to rcmove dust.
The
roller heater is fragile. DO
NOT DROP
or impact machine.
Store laminator in
a cool
dry
place.
2.
3.
3.
4.
5.
I.
(Figure
5)
(Figure
4)
l
)714-3101-2_TL90l
Final
Book_vs.pdl

3M Scotch TL901 Specifications

General

Brand	3M
Model	Scotch TL901
Category	Laminator
Language	English