4.6.2
4.6.2 Gallons, since last regeneration: This display shows the number of gallons that have been treated
since the last re generation. This display will equal zero if a water meter is not installed. Press the NEXT
button to go to next parameter. Press REGEN to return to previous step.
4.6.1 Days, since last regeneration: This display shows the days since the last regeneration occurred.
Press the NEXT to go to next parameter. Press REGEN to exit Diagnostics.
4.6.3 Gallons, reserve capacity used for last 7 days: If the valve is set up as a softener, a meter is
installed and Set Gallons Capacity is set to “Auto,” this display shows 0 day (for today) and flashes the
reserve capacity. Pressing the
button will show day 1 (which would be yesterday) and flashes the reserve capacity used. Pressing
the button again will show day 2 (the day before yesterday) and the reserve capacity. Keep pressing
the button to show the gallons for days 3, 4, 5 and 6.
The button can be pressed to move backwards in the day series. Press the NEXT button at any time
to go to next parameter. Press REGEN to return to previous step.
To Next Page
Loading...
