To Next PageTo Next Page
Need help?Do you have a question about the 3M CWS Series and is the answer not in the manual?
General| Brand | 3M |
|---|---|
| Model | CWS Series |
| Category | Water Dispenser |
| Language | English |
Describes the meaning of warning and caution symbols used in the manual.
Guidance on checking for shipping damage and proper handling techniques for the equipment.
Emphasizes the necessity of water analysis for proper softener selection and includes a space for recording results.
Details required water pressure and flow rate checks for satisfactory softener operation.
Instructions on selecting the correct installation location, considering factors like proximity to water source and drain.
Key considerations for planning the installation, including local codes and water usage.
Illustrates the typical plumbing configuration for installing the softener in a standard well water system.
Illustrates the typical plumbing configuration for installing the softener in a public water supply system.
Provides a summary of the initial steps involved in the installation process, from unboxing to plumbing connections.
Instructions for correctly connecting the drain line and brine tank, including safety precautions.
Procedures for specific service tasks related to the control valve, including removal and reassembly.
Steps for configuring initial installer settings on the control valve, such as time and hardness.
Explains how to access and interpret diagnostic information displayed on the control valve.
Information on accessing valve history data and understanding error codes for troubleshooting.
Explains system displays, regeneration modes, and how to set the time of day.
Guidance on salt replenishment, type of salt to use, and brine tank cleaning procedures.
Methods to prevent iron-fouling of the softener's mineral bed and maintain optimal performance.
Notes on potential unit malfunctions and how to adjust regeneration settings for changing conditions.
Instructions for disassembling and servicing the drive assembly, including motor and gear components.
Details on servicing pistons and the drive cap assembly, including removal and reassembly.
Procedures for maintaining the spacer stack assembly, including inspection and cleaning.
Guidance on servicing injector components, screens, and flow control assemblies.
Instructions for servicing the water meter and bypass valve components, including cleaning and replacement.
Details on servicing and reinstalling the bypass valve, including handling of rotors and handles.
