IMPORTANT
OWNERS MANUAL & INSTALLATION GUIDE
BOTTLE FILLER
ALL SERVICE TO BE PERFORMED BY AUTHORIZED SERVICE PERSON
IMPORTANT! INSTALLER PLEASE NOTE.
Bottle Fillers and Fountains are among the most hassle free to install
on the market today. To insure that these models are installed correctly,
PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING THE
INSTALLATION. CHECK YOUR INSTALLATION FOR COMPLIANCE
WITH PLUMBING, ELECTRICAL AND OTHER APPLICABLE CODES.
After installation, leave these instructions with the units for future reference.
GT 1000
The grounding of electrical equipment such as telephone, computers, etc., to water line a
common procedure. This grounding may be in the building or may occur away from the
building. This grounding can cause electrical feedback into a fountain, creating an electrolysis
which causes a metallic taste or an increase in the metal content of the water. This condition
is avoidable by using the proper materials as indicated. Any drain fitting provided by the installer
should be made of plastic to electrically isolate the fountain from the building’s plumbing system.
Revision A-0
To Next Page
Need help?
General
