3M X26i - Page 24


24
(e) In case of an individual projector is selected
Projector Information
Projector Name --- Displays the projector name.
Model --- Displays the model name.
Comment --- Displays the comment.
Power --- Turn on / off power for a group of projectors.
Input Source --- Change input source.
Aspect --- Change aspect ratio.
Whisper --- Change Whisper / Eco mode.
Mirror --- Change mirror status.
Blank --- Change blank on / off.
Mute --- Change sound mute status.
Freeze --- Change freeze status.
Display Image --- Select My Image (e-SHOT) to display / OFF.
Messenger --- Select Messenger to display / OFF.
Brightness --- Change brightness.
[-]: Decrease value.
[+]: Increase value.
Contrast --- Change contrast.
[-]: Decrease value.
[+]: Increase value.
Sharpness --- Change sharpness.
[-]: Decrease value.
[+]: Increase value.
Color --- Change color.
[-]: Decrease value.
[+]: Increase value.
Tint --- Change tint.
[-]: Decrease value.
[+]: Increase value.
Auto Adjust --- Execute auto image adjustment.
Lamp Time Reset --- Reset the lamp time.
Filter Time Reset --- Reset the filter time.
Advanced Control --- Open the projector Advance Control Menu.
(‘Advanced Control’ Screen varies depending on the projector model.)
© 3M 2012. All Rights Reserved.