80
3.25.3 Control User-defined Model
(1) Power On
Select [Control] [Power ON] to turn on the power. You can also turn on the power by clicking the power
on icon on the toolbar. If you select a group of projectors, all projectors in the group are powered on.
(2) Power Off
Select [Control] [Power OFF] to turn off the power. You can also turn off the power by clicking the power
off icon on the toolbar. If you select a group of projectors, all projectors in the group are powered off.
(3) Command No.1-10
Select [Control] [Execute Command] to execute a command.
(4) Schedule
Only Power On / Off commands are allowed as the schedule event for User-defined model.
3.26 Open the build-in HTML page in the projector
You can access the projector built-in HTML page from PJMan directly. Select the projector from the tree view,
and then go to [Option] [Open with] from the menu. The default browser on your computer will launch
automatically and access the selected projector HTML page. This function supports embedded network
projector models only.
To Next Page
Loading...
