85
7 Create Log Report
In order to create Log Report, choose a projector or group that you want to create Report from the tree view.
Ands then, select [File] [Log Report]. The following dialogue appears.
Period --- The reporting period.
Start : Start Date
End : End Date
Output folder --- Output folder
The Log Report will create in the output folder when OK
button is pressed. The folder contains individual Log
Report of each projector separately. The individual log
life is provided as csv format with projector name
(“projector name.csv”).
The format of Log Report is shown below.
Item Description Note
Projector Name Projector name
Model Model name
Connection Connection type Serial (RS232C):
COM Port number
Network:
IP Address:Portnumber (MAC address)
Period Log data period yyyy/mm/dd
Use Information Usage information
Date Date yyyy/mm/dd
Power On Count Sum of power status change from OFF to ON
Power Off Count Sum of power status change from ON to OFF
Lamp Time Lamp hours The lamp hours when the report is generated.
Filter Time Filter hours The filter hours when the report is generated.
Error Count Sum of Error / Warnings
Error Information Error Information
Date Date of Error yyyy/mm/dd
Time Time of Error hh:nn:ss
Error Info Error type
Projector Name: Projector 1
Model: X62w
Connection: 192.168.1.10:23 (00-00-87-f3-eb-01)
Period: 2008/04/01 - 2008/04/30
Use Information
[Date],[Power On Count],[Power Off Count],[Lamp Time],[Filter Time],[Error Count]
2008/04/01,5,5,145,145,0
2008/04/02,3,3,148,148,1
:
:
2008/04/30,1,1,193,193,0
Error Information
[Date], [Time], [Error Info]
2008/04/02,17:43:36,Disconnect
To Next Page
Loading...
