3M X26i - Page 40


40
Service
Function General Description
Auto Adjust Selects the automatic adjustment mode.
PL95X / X64w / X95 / X95K / X95i / X95iK
Disable / Fast / Fine
PL90X / X62w / X90 / X90K / X90w
Disable / Enable
Remote Receiv. Turns off/on the remote sensor.
PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK
Front (Off / On)
Rear (Off / On)
Top (Off / On)
 This function is not displayed for X62w / X64w.
Remote Freq. - Normal Changes the projector’s remote sensor off/on of the normal frequency.
Disable / Enable
Remote Freq. - High Changes the projector’s remote sensor off/on of the high frequency.
Disable / Enable
[OTHER] Tab
Function General Description
Power Turns off/on the power.
Off / On
Input Source Switches the input source.
X62w
RGB1 / RGB2 / Video / S-Video / Component / MIU
X64w
Computer1 / Computer2 / Video / S-Video / Component / MIU
PL90X / X90 / X90K
RGB1 / RGB2 / M1-D / Video / S-Video / Component
X90w
RGB1 / RGB2 / M1-D / Video / S-Video / Component / MIU
PL95X / X95 / X95K / X95i / X95iK
RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU
Picture Mode Switches the picture mode.
PL90X / X62w / X90 / X90K / X90w
Normal / Cinema / Dynamic / Board(Black) / Board(Green) / White Board / Custom
PL95X / X64w / X95 / X95K / X95i / X95iK
Normal / Cinema / Dynamic / Board(Black) / Board(Green) / White Board / Daytime / Custom
 Custom is displayed only. It cannot be set.
Blank On / Off Turns off/on the blank.
Off / On
Mute Turns off/on the mute.
Off / On
Freeze Turns off/on the freeze.
Normal / Freeze
Magnify Adjusts the magnify setting
[-]: Decrease the magnify value.
[+]: Increase the magnify value.
e-SHOT Displays the e-SHOT data.
Off / Image1 / Image2 / Image3 / Image4
 This function is not displayed for X95i / X95iK.
My Image Displays the My Image data.
Off / Image1 / Image2 / Image3 / Image4
 This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.
© 3M 2012. All Rights Reserved.