57
Item Description
SETUP
(continued)
MODE
Use the ▲/▼ buttons to select the mode of
the network communication system. Select it
according to the setting of your PC.
ADHOC
ó
INFRASTRUCTURE
CH
Use the ▲/▼ buttons to select the channel
of the wireless LAN while using it. Select it
according to the setting of your PC.
The channels 1 to 11 are available.
• The available channels would be various depending on a country.
In addition, wireless LAN card might be required due to the
standard.
ENCRYPTION
Use the ▲/▼ buttons to select the encryption
method to be used.
WPA2-PSK(AES)
ô
WPA-PSK(AES)
ó
WPA-PSK(TKIP)
ó
WEP 128bit
ó
WEP 64bit
ó
OFF
SPEED
Use the ▲/▼ buttons to select the transfer rate.
(M : Mbps : Megabits per second)
AUTO
ó
54M
ó
48M
ó
36M
ó
24M
ó
18M
ô ô
1M
ó
2M
ó
5.5M
ó
6M
ó
9M
ó
11M
ó
12M
• The AUTO mode automatically selects the
optimum rate.
• Transfer rates may change due to the network
situation.
NETWORK MODE
Use the ▲/▼ buttons to select the network mode.
WIRELESS
ó
WIRED
• The network mode will be initialized whenever the power is turned
on with the power switch.
• The WIRELESS will be enabled when the wireless network card is
installed.
• The WIRED will be enabled when the wireless network card is not
installed.
MIU Menu (continued)
MIU Menu
To Next Page
Loading...
