19
The discovery feature allows you to search projectors on the network automatically. The discovery works when
you are selecting a group or root. Select [Edit] [Discovery] from the menu. The discovery window is shown
below. Click start button to begin the discovery process.
For searching certain IP address range, please specify the IP address range to enter Start and End address,
and then check the checkbox ”Specify an address range and search” and click the [Start] button. It will take
several minutes depending upon the number of IP addresses needed to be scanned.
When discovery finds projectors, the list of projectors
is shown and [Register] button becomes available.
You can register multiple projectors at the same time.
When the [Register] button is clicked, the projector is
added under the group or root that you have selected.
The projector name and model is automatically
assigned. Please edit the name and model as
needed.
[NOTE]
Windows Security Alert will be shown on your display when the discovery function activates, if Windows
Firewall is “On” (Windows XP SP2 or later). Please choose “Unblock” to add the software onto the exception
list. Other firewall security software may block the discovery function. In that case, please add the software to
the safe list or disable firewall software when you use discovery function.
To Next Page
Loading...
