02
1. Installing the electrostatic sticker
Paste the electrostatic sticker on the recommended area on the front
windshield. Press the sticker to remove air bubbles out.
Avoid the edge of the windshield and select the flat and smooth area for the
installation.
Note: Keep windshield clean and dry without liquid residue to prevent the sticker from
losing adhesion and dash cam from dropping.
2. Installing the memory card
Insert the memory card into the card slot with the contacts side facing left,
as illustrated in the figure.
3. Mounting the dash cam
Paste the dash cam onto the electrostatic sticker.
4. Connecting the power cord
Connect the dash cam and car charger with the power cord.
Installation
To Next Page
Loading...
