8BITDO NES - Instruction Manual for PS 3; PS3 Controller Setup; PS4 Controller Setup; 8 Bitdo Controllers for PS3

PS3 controller.Xinput
For PS4 controller
1-insert Retro Receiver into console and then press pairing button(the LED will rapidly blink).
2-Press and hold the PS and share buttons until the lightbar begins to strobe quickly in double.
3-Wait until your Retro Receiver’s LED is solid blue and the controller’s lightbar stay on.
4-For next Connection only need to press PS button and wait until receiver’s LED is solid blue.
PS4 controller.X-input
Instruction Manual for PS 3
PS3
For 8Bitdo controllers
1-Power on 8bitdo controller(Mode 1) to enter pairing mode.
2-insert Retro Receiver into console and then press the pairing button (the LED will rapidly blink).
3-Wait until your Retro receiver and your 8bitdo controller’s LEDs are both solid blue.
4-Your controller is now paired.