Product Introduction |
11
2.3.6 Connecting to a LAN
To connect to a LAN (Local Area Network) you require a cat5, cat5e or cat6 network
cable (not supplied).
1. Connect one of the crystal plugs on the cable to the player’s RJ45 LAN socket;
2. Connect the other crystal plug on the cable to a RJ45 LAN port on your router,
switch, or hub devices.
2.3.7 Connecting to a WLAN
1. Make sure the player is powered on;
2. Search for your router’s SSID and then key in the correct security key if neces-
sary.
Note: Please refer to ‘3.1.4 Changing Network Settings’ for more details about wire-
less setup
1. POWER button & indicator
2.4 Front Panel
To Next Page
Loading...