EasyManua.ls Logo

A1 Alpha 20+ - Connecting to Wi-Fi

A1 Alpha 20+
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
Set Access Point Names
To connect to the Internet, you can use the default
Access Point Names (APN). And if you want to add
a new APN, please contact the service provider to
get the necessary information.
1. Open Settings and touch Network &
Internet > SIM cards > Mobile network.
2. Touch the card tab.
3. Touch Access point names and then touch
.
4. Touch each item to enter the information you
get from your service provider.
4. Touch
> Save to complete.
NOTE:
To set the APN to default settings, touch >
Reset to default.
Connecting to Wi-Fi
Wi-Fi is a wireless networking technology that can
provide Internet access at distances of up to 100
meters, depending on the Wi-Fi router and your
surroundings.
To turn Wi-Fi on and connect to a Wi-Fi network:
1. Open Settings and touch Network &
Internet > Wi-Fi.
2. Slide the switch to the on position to turn on
Wi-Fi.
3. Touch a Wi-Fi network name to connect to it.
4. If the network is secured, enter the password
and touch CONNECT, or touch
to scan the
QR code of the password when it is available.

Table of Contents

Related product manuals