41
No. Step
Assembly
inspection
7 Steering head
Check steering head bearing play & correct or replace as necessary X
8 Assembly: Gears
Clean and grease rear and front derailleur.
Check the condition and function of the shift cable and outside sheaths,
replace as necessary
Check derailleur setting and correct as necessary X
Check all screws at front/rear derailleur for force fit X
9 Assembly: Brake system
Clean brake bosses.
Check brake pads and replace as necessary
Check brake pressure and refill brake oil as necessary. X
Check brake system for tightness. X
Check brake system screws for force fit X
Check brake function and effect X
10 Fenders-Rack-Side stand-Light system
Retighten all screws X
Check light system for function & setting and correct as necessary X
11 Assembly: electric drive system & lock
Check lines for correct attachment, breaks, chafing and kinking points,
replace as necessary
X
Check plug contacts for corrosion and scaling,
Clean or replace as necessary
Check cable connections for correct connection
Check display for function & error codes X
Execute current software update
Check battery condition and charge X
Check alignment & condition of battery sliding rails and correct/replace as
necessary
Check lock barrel at battery holder for function, clean and grease
Check brake switch/motor stop switch for function
Date Signature / stamp of A2B specialist workshop
To Next Page
Loading...
