A2Z Ozone MP-3000 - Timer Functions; 15 Minutes to 4 Hour Timer; Continuous Timer Operation

6
Timer Functions
The MP-3000 (110V) Ozone Generator is equipped with timer functions. The hourly timer
knob adjusts between 15 minutes and 4 hours, and any time interval in between.
• 15 minutes to 4 hours
• To operate this timer, turn the knob clockwise to the desired set position.
Continuous Timer
• A continuous option is available for the MP-3000 (110V) Ozone Generator.
• To operate this timer, turn the knob counterclockwise.
Note: You can control the MP-3000 (110V) Ozone Generator with a garden timer. Just
turn on all switches and position timer to “ON”. Plug the unit to the timer (15 AMP) and
set the timer to run the unit. Be sure to set the timer to cool down the unit at least 2
hours between each runtime.