12
2015 American Air Filter Company, Inc. Any use of the text or
images this document contains, without permission of American Air
Filter Company, Inc., is prohibited. FabriPulse, AAF, REDClean,
REDFiltration, and Reliable Efficient Durable are registered
trademarks of American Air Filter Company, Inc. d/b/a AAF
International.
4 PRODUCT SHIPMENT
Unless otherwise defined in the purchase order and agreed by AAF, the
FabriPulse M is arranged and palletized for domestic transit and shipped FOB the
AAF factory. The method of shipment will be as specified in the customer’s
purchase order to AAF.
4.1 How the product ships
All of the FabriPulse M dust collectors are shipped factory assembled
requiring only:
• Assembly of hopper section to housing on sizes 336 and 420
• Field bolting of the legs and braces
• Connection of ductwork and/or the fan
• Connection of hopper discharge device(s)
• Mounting and wiring of the control box
• Connection of compressed air supply
• Differential and air pressure gauge connections
4.2 Items that ship separately
To save the customer money, AAF International may ship items separately.
The customer will be notified of which equipment ships separately when the order
is placed. Items that ship separately should be set aside in an area that is clean,
dry, and in a place where damage to the equipment will not occur.
5 PRODUCT RECEIPT AT THE DESIGNATED DELIVERY POINT
5.1 Responsibilities of the customer or customer’s agent
Ensure all loading/unloading equipment and safety equipment is on site at
the time of delivery. Safe and efficient operation of the collector depends on
proper installation. Know proper codes and regulations before installation starts.
5.2 Receiving
Remove crates, tarps, shipping straps, etc. along with any loose items or
equipment before unloading the FabriPulse M.
5.3 Inspection on arrival
The FabriPulse M is normally shipped by truck and should be checked for
damage that may have occurred in route. Compare the collector(s) received to the
description and/or drawing of the collector(s) ordered. Report any differences or
missing items from the order to AAF International. Remove loose items or
components before lifting the collector from the truck.
To Next Page
Loading...
Need help?
General
