Need help?Do you have a question about the A&D FG-150KBM and is the answer not in the manual?
Explains the meaning of stable, net, zero, hi, ok, lo indicators.
Describes the function of ON/OFF, PRINT, MODE, RE-ZERO, ZERO, TARE switches.
Step-by-step guide for connecting the display pod to the scale base.
Instructions for selecting a location and leveling the scale.
Guidelines for choosing an optimal and stable installation environment.
Details on using the AC adapter and batteries as power sources.
How to power the scale on and off, including auto power-off function.
Steps to change the unit of measurement (e.g., kg, lb, oz, pcs).
General procedure for weighing, including zeroing and taring.
Explains different display resolutions and how to set them.
Instructions for setting the upper and lower limits for the comparator function.
Detailed steps for calibrating the scale using a known calibration weight.
Procedure to correct for gravity variations at different locations.
Guide on how to access and modify scale function settings.
A comprehensive list of available functions and their descriptions.
Instructions for installing optional interface boards.
Details on connecting the scale via the RS-232C serial interface.
Explains different modes for outputting data via RS-232C.
Lists commands for controlling the scale via computer.
Information on the RS-232C interface and relay output for comparator functions.
General advice and precautions for scale maintenance and cleaning.
Lists and explains various error codes displayed by the scale.
Technical specifications of the FG series scales, including capacity and display.
Provides detailed physical dimensions for different FG series models.
To Next Page
General
