To Next PageTo Next PageWhat to do if A&D FX-120i Scales show an overload error?
If the A&D Scales display an overload error, it means a sample exceeding the balance's capacity has been placed on the pan. Remove the sample to resolve this.
How to fix stability error on A&D Scales?
If you see a stability error on your A&D Scales, it indicates the balance is unable to stabilize due to environmental factors. To fix this, prevent vibration, drafts, temperature changes, static electricity, and magnetic fields.
How to resolve communications error on A&D FX-120i Scales?
A communications error on A&D Scales indicates a protocol error occurred during communications. Verify the format, baud rate, and parity to resolve this.
What to do if A&D Scales show 'Not ready' error?
If the A&D Scales show a 'Not ready' error, it means a received command cannot be processed. Adjust the delay time to transmit a command to resolve this issue.
Why do A&D FX-120i display a format error?
If your A&D Scales display a format error, it means a command includes incorrect data. Check the command to ensure it is correct.
What does 'Out of range error' mean on A&D FX-120i Scales?
If the A&D Scales display an 'Out of range error', it means the value entered is beyond the settable range. Re-enter the value within the acceptable range.
What does timeout error mean on A&D FX-120i Scales?
If the A&D Scales display a timeout error, it means the balance didn't receive the next character of a command within one second. Check the communication setup.
What is an undefined command error on A&D Scales?
If the A&D Scales display an undefined command error, it means an undefined command was received. You should confirm the command being sent to the scales.
Why do A&D FX-120i show excess characters error?
If the A&D Scales display an excess characters error, it means the balance received too many characters in a command. You should confirm the command.
What causes parameter setting error on A&D FX-120i Scales?
If the A&D Scales display a parameter setting error, it indicates that the received data exceeds the acceptable range for the balance. Confirm the parameter range of the command.
General| Capacity | 122 g |
|---|---|
| Readability | 0.001 g |
| Calibration | External |
| Display | LCD |
| Power Supply | AC adapter |
| Repeatability | ±0.001 g |
| Linearity | ±0.002 g |
| Interface | RS-232C |
| Operating Temperature | 5°C to 40°C |
| Power Source | AC adapter |
| Units | g, oz, ozt, dwt, ct, GN |
Overview of the manual's contents and purpose.
Highlights key capabilities and design aspects of the balance.
Instructions for unpacking and setting up the balance components.
Guidelines for proper installation and environmental conditions before operating.
Important considerations and warnings to follow while operating the balance.
Explanation of balance indicators, symbols, and the function of each key.
Lists available weighing units, their abbreviations, and display formats.
Procedure for selecting and arranging units in the function table.
Step-by-step guide for performing basic weighing in gram mode.
How to use the balance for counting items based on unit mass.
Instructions for statistically calculating and displaying weight data.
Overview of available calibration modes, terms, and cautions.
Procedure for calibrating the balance using its internal weight.
Steps for calibrating the balance with an external calibration weight.
How to enable or disable balance parameters to prevent unintentional changes.
Procedure to reset balance parameters to factory default settings.
Explanation of the two-layer structure (Class and Item) of the function table.
Details on how display elements and keys function within the function table mode.
Comprehensive list and description of parameters available in the function table.
Description of parameters related to environmental conditions and display settings.
Process for setting a unique identification number for the balance.
How to output GLP/GMP compliant reports for calibration data.
Explanation of PASS settings, login levels, and access restrictions.
Configuration steps for connecting and using AD-8127/AD-8126 printers.
How to connect the balance to a PC via RS-232C or optional USB interface.
Explains how to use WinCT software for data communication with the balance.
A list of commands for querying weight data and controlling the balance.
Explanation of acknowledge codes and error codes received during communication.
Guidelines for cleaning the balance main unit, breeze break, and weighing pan.
Steps to diagnose issues related to balance performance and operating environment.
List of error codes, their meanings, and suggested solutions.
Details on the USB interface for data transmission to a PC.
Information about connecting the balance to a LAN for data management.
Definitions of key terms used throughout the manual.
