What to do if A&D FX-2000i show an overload error?
If the A&D Scales display an overload error, it means a sample exceeding the balance's capacity has been placed on the pan. Remove the sample to resolve this.
How to fix stability error on A&D FX-2000i?
If you see a stability error on your A&D Scales, it indicates the balance is unable to stabilize due to environmental factors. To fix this, prevent vibration, drafts, temperature changes, static electricity, and magnetic fields.
How to resolve communications error on A&D FX-2000i Scales?
A communications error on A&D Scales indicates a protocol error occurred during communications. Verify the format, baud rate, and parity to resolve this.
What to do if A&D Scales show 'Not ready' error?
If the A&D Scales show a 'Not ready' error, it means a received command cannot be processed. Adjust the delay time to transmit a command to resolve this issue.
Why do A&D FX-2000i display a format error?
If your A&D Scales display a format error, it means a command includes incorrect data. Check the command to ensure it is correct.
What does 'Out of range error' mean on A&D Scales?
If the A&D Scales display an 'Out of range error', it means the value entered is beyond the settable range. Re-enter the value within the acceptable range.
What does timeout error mean on A&D Scales?
If the A&D Scales display a timeout error, it means the balance didn't receive the next character of a command within one second. Check the communication setup.
What is an undefined command error on A&D Scales?
If the A&D Scales display an undefined command error, it means an undefined command was received. You should confirm the command being sent to the scales.
Why do A&D FX-2000i show excess characters error?
If the A&D Scales display an excess characters error, it means the balance received too many characters in a command. You should confirm the command.
What causes parameter setting error on A&D Scales?
If the A&D Scales display a parameter setting error, it indicates that the received data exceeds the acceptable range for the balance. Confirm the parameter range of the command.
Overview of manual content, features, and compliance guidelines for the balance.
Highlights key features and capabilities of the balance, including calibration and connectivity.
Details FCC rules and CE mark directives for regulatory compliance and safety standards.
Instructions for carefully unpacking the balance and checking all included components.
Step-by-step guide for installing and assembling the balance unit correctly.
Guidelines for optimal installation environment and balance leveling for accuracy.
Precautions for handling static electricity, magnetic materials, and proper operation.
Instructions for cleaning and maintenance after using the balance.
Information on standby mode and initial warm-up for accurate weighing.
Explains various indicators and symbols shown on the balance display.
Details basic key functions and operations for using the balance.
Lists available weighing units and their conversion factors.
Instructions on how to select and arrange units in the function table.
Step-by-step guide for basic weighing procedures in gram mode.
Notes default weighing unit and refers to unit storing procedures.
Guide for basic weighing procedures specific to FZ-GD/FX-GD series.
Explains how to use the counting mode to determine the number of objects.
Describes using percent mode for target weighing and sample variable checking.
Guide to switching to statistical calculation mode and function table settings.
Step-by-step instructions for entering data in statistical calculation mode.
How to change function table settings for statistical mode and zero after output.
Explains internal mass and external weight calibration modes.
Detailed procedure for one-touch internal mass calibration.
Step-by-step guide for calibrating using an external weight.
Procedure for testing balance accuracy with an external weight.
Explains switches to protect parameters from unintentional changes.
Resets balance parameters to factory settings.
Explains the two-layer structure of the function table menu.
Comprehensive details of function table items and parameters.
How data output modes like key mode and stream mode function.
How to set and confirm the balance's clock and calendar.
Explains the comparator function for HI, OK, LO results.
Guide to setting a unique ID number for the balance.
How to output GLP/GMP compliant reports.
Step-by-step guide to enable password lock function.
Instructions for entering password when the balance starts.
How to change or register passwords for the balance.
Detailed steps for changing the password and login levels.
Instructions for deleting user passwords.
Guide for connecting to printers and configuring settings.
Steps to connect and set up the AD-8121B printer.
How to connect the balance to a personal computer.
Using WinCT software for data communication and analysis.
Connecting printer and PC simultaneously via USB interface.
Detailed list of commands, their functions, and parameters.
Explains acknowledge codes and error codes received from the balance.
Configuration of "Data output" and "Serial interface" functions.
Instructions for cleaning the balance main unit, breeze break, and weighing pan.
Steps to check balance performance and operating environment.
Lists and explains various error codes displayed by the balance.
Guidance on contacting dealers for service or repair.
Adds USB connectivity for data transfer.
Enables LAN connectivity for balance management.
Provides portable operation with a rechargeable battery.
Accessories to improve weighing stability and for animals.
Kit for determining sample density.
To Next Page
General
