A&D FX-2000i - Details of the Function Table

42
10.3. Details of the Function Table
Class
Item and Parameter
Description
ba5fnc
Environment
Display
Cond
Condition
0
Fast response, sensitive value FAST
With “Hold 1”, sets the
averaging time.
1
MID.
2
Slow response, stable value SLOW
5t-b
Stability band width
0
Stable range is ±1 digit
The stabilization indicator
illuminates when the display
fluctuation is within the range.
With “Hold 1”, sets the
stabilization range.
1
2 Stable range is ±3 digits
Hold
Hold function
0
OFF
Holds the display when stable in
animal mode. With “Hold 1”,
ANIMAL turns on.
1 ON
trc
Zero tracking
0
OFF
Keeps zero display by tracking
zero drift.
1
Normal
2
Strong
3
Very strong
5pd
Display refresh rate
0
5 times/second
Period to refresh the display
1
10 times/second
2
20 times/second
pnt
Decimal point
0
Point (.)
Decimal point format
1
Comma (,)
p-on
Auto display-ON
0
OFF
Turns on the weighing mode
display when the AC adapter is
connected.
1 ON
poff
Auto display-OFF
0
OFF
Turns off the display after 10
minutes of inactivity.
1
ON (10 minutes)
rng
Display at start
0
Displays
Select whether or not to display
the minimum weighing value at
weighing start.
1 Does not display
beep
Beep
0
Does not sound
Select whether or not to sound
the beep when operating on
keys.
1 Sounds
Cl adj *
Clock
Refer to “10-9 Clock and calendar
function”.
Confirms and sets the time and
date. The time and date are
added to output data.
Cp fnc
Comparator
Cp
Comparator mode
0
No comparison
1
Comparison, excluding "near zero" when stable value or
overloaded
2
Comparison, including "near zero" when stable value or
overloaded
3
Continuous comparison, excluding "near zero"
4
Continuous comparison, including "near zero"
bep
-
LO buzzer
0
OFF
1
ON
bep-
OK buzzer
0
OFF
1
ON
bep
-
HI buzzer
0
OFF
1
ON
: Factory settings. Digit is a unit of minimum weighing value
*
: Only for the FZ-i
/
FZ-iWP
/
FZ-GD series