What to do if A&D FX-1200i Scales show an overload error?
If the A&D Scales display an overload error, it means a sample exceeding the balance's capacity has been placed on the pan. Remove the sample to resolve this.
How to fix stability error on A&D FX-1200i Scales?
If you see a stability error on your A&D Scales, it indicates the balance is unable to stabilize due to environmental factors. To fix this, prevent vibration, drafts, temperature changes, static electricity, and magnetic fields.
How to resolve communications error on A&D FX-1200i?
A communications error on A&D Scales indicates a protocol error occurred during communications. Verify the format, baud rate, and parity to resolve this.
What to do if A&D FX-1200i show 'Not ready' error?
If the A&D Scales show a 'Not ready' error, it means a received command cannot be processed. Adjust the delay time to transmit a command to resolve this issue.
Why do A&D FX-1200i display a format error?
If your A&D Scales display a format error, it means a command includes incorrect data. Check the command to ensure it is correct.
What does 'Out of range error' mean on A&D Scales?
If the A&D Scales display an 'Out of range error', it means the value entered is beyond the settable range. Re-enter the value within the acceptable range.
What does timeout error mean on A&D FX-1200i?
If the A&D Scales display a timeout error, it means the balance didn't receive the next character of a command within one second. Check the communication setup.
What is an undefined command error on A&D FX-1200i?
If the A&D Scales display an undefined command error, it means an undefined command was received. You should confirm the command being sent to the scales.
Why do A&D FX-1200i show excess characters error?
If the A&D Scales display an excess characters error, it means the balance received too many characters in a command. You should confirm the command.
What causes parameter setting error on A&D FX-1200i?
If the A&D Scales display a parameter setting error, it indicates that the received data exceeds the acceptable range for the balance. Confirm the parameter range of the command.
Overview of the manual's five-part structure and content.
Highlights the balance's main capabilities and characteristics.
Instructions for unpacking, assembling, and leveling the balance.
Essential environmental and setup precautions before operating the balance.
Explains balance display indicators and the purpose of each key.
Lists and explains the various weighing units and modes supported by the balance.
Guides for using counting (PCS) and percent (%) weighing modes.
Instructions for enabling and using the statistical calculation mode.
Covers internal mass and external weight calibration methods.
Explains the function table's two-layer structure and navigation keys.
Comprehensive explanation of various parameters within the function table.
Procedure for assigning an identification number for GLP/GMP compliance.
How to generate and output GLP/GMP compliant reports.
Guides for connecting and configuring AD-8127/AD-8121B printers.
Instructions for connecting the balance to a PC via RS-232C or USB.
Explains WinCT software for data analysis and balance control.
Instructions for cleaning the balance and its components.
Steps to diagnose weighing problems related to performance or operating conditions.
Explains common error codes displayed by the balance and their meanings.
General| Capacity | 1200 g |
|---|---|
| Readability | 0.01 g |
| Calibration | External Calibration |
| Power Supply | AC adapter (included) |
| Repeatability (σ) | 0.01 g |
| Linearity | ±0.02 g |
| Interface | RS-232C |
| Weight | 1.5 kg |
| Stabilization Time | 2 seconds |
| Display | LCD |
To Next Page
