To Next PageTo Next PageHow to fix weighing pan error on A&D Scales?
If the A&D Scales show a weighing pan error because the weight value is too light, confirm that the weighing pan is properly installed and calibrate the balance.
What does sample mass error mean on A&D FX-1200i?
If the A&D Scales display a sample mass error, it means the balance can't store the sample for counting or percent mode because it's too light. Use a heavier sample.
How to resolve unit mass error on A&D FX-1200i?
If the A&D Scales display a unit mass error, it means the sample unit mass for the counting mode is too light. Add samples to reach the specified number and then press the PRINT key.
General| Capacity | 1200 g |
|---|---|
| Readability | 0.01 g |
| Calibration | External Calibration |
| Power Supply | AC adapter (included) |
| Repeatability (σ) | 0.01 g |
| Linearity | ±0.02 g |
| Interface | RS-232C |
| Weight | 1.5 kg |
| Stabilization Time | 2 seconds |
| Display | LCD |
Overview of the manual's five-part structure and content.
Highlights the balance's main capabilities and characteristics.
Instructions for unpacking, assembling, and leveling the balance.
Essential environmental and setup precautions before operating the balance.
Explains balance display indicators and the purpose of each key.
Lists and explains the various weighing units and modes supported by the balance.
Guides for using counting (PCS) and percent (%) weighing modes.
Instructions for enabling and using the statistical calculation mode.
Covers internal mass and external weight calibration methods.
Explains the function table's two-layer structure and navigation keys.
Comprehensive explanation of various parameters within the function table.
Procedure for assigning an identification number for GLP/GMP compliance.
How to generate and output GLP/GMP compliant reports.
Guides for connecting and configuring AD-8127/AD-8121B printers.
Instructions for connecting the balance to a PC via RS-232C or USB.
Explains WinCT software for data analysis and balance control.
Instructions for cleaning the balance and its components.
Steps to diagnose weighing problems related to performance or operating conditions.
Explains common error codes displayed by the balance and their meanings.
