What to do if A&D Scales show an overload error?
If the A&D Scales display an overload error, it means a sample exceeding the balance's capacity has been placed on the pan. Remove the sample to resolve this.
How to fix stability error on A&D FZ-300i?
If you see a stability error on your A&D Scales, it indicates the balance is unable to stabilize due to environmental factors. To fix this, prevent vibration, drafts, temperature changes, static electricity, and magnetic fields.
How to resolve communications error on A&D FZ-300i?
A communications error on A&D Scales indicates a protocol error occurred during communications. Verify the format, baud rate, and parity to resolve this.
What to do if A&D FZ-300i show 'Not ready' error?
If the A&D Scales show a 'Not ready' error, it means a received command cannot be processed. Adjust the delay time to transmit a command to resolve this issue.
Why do A&D FZ-300i Scales display a format error?
If your A&D Scales display a format error, it means a command includes incorrect data. Check the command to ensure it is correct.
What does 'Out of range error' mean on A&D FZ-300i?
If the A&D Scales display an 'Out of range error', it means the value entered is beyond the settable range. Re-enter the value within the acceptable range.
What does timeout error mean on A&D FZ-300i?
If the A&D Scales display a timeout error, it means the balance didn't receive the next character of a command within one second. Check the communication setup.
What is an undefined command error on A&D FZ-300i?
If the A&D Scales display an undefined command error, it means an undefined command was received. You should confirm the command being sent to the scales.
Why do A&D FZ-300i Scales show excess characters error?
If the A&D Scales display an excess characters error, it means the balance received too many characters in a command. You should confirm the command.
What causes parameter setting error on A&D FZ-300i?
If the A&D Scales display a parameter setting error, it indicates that the received data exceeds the acceptable range for the balance. Confirm the parameter range of the command.
Overview of the manual's five main parts: operation, environment, functions, interface, and maintenance.
Highlights key features like internal mass for calibration, dustproof casing, fast stabilization, and multiple units.
Steps for unpacking, assembling, installing, leveling, and connecting the balance to power.
Guidelines for installing the balance in a suitable environment (temperature, humidity, light, dust, vibration).
Advice on handling static electricity, magnetic materials, temperature differences, and proper key operation.
Details available weighing units and modes, and how to select them.
Step-by-step guide for basic weighing in Gram mode using the weighing pan and tare function.
How to determine the number of objects in a sample using unit mass and ACAI function.
Mode for displaying weight as a percentage relative to a 100% reference mass.
How to enable and use the statistical calculation mode for data analysis.
Function to stabilize weight values by adjusting response rate against drafts and vibration.
Overview of calibration modes: internal mass, external weight, and calibration test.
Steps for calibrating the balance using an external weight.
Resets various parameters to factory settings, including calibration data and function switches.
Explanation of the function table structure and how to navigate it.
Setting the balance ID number for identification in GLP/GMP reports.
How to generate GLP/GMP compliant reports for calibration and weighing data.
How to enable and configure password protection for balance usage and settings.
Details on the RS-232C interface, pin assignments, and communication parameters.
Guides on connecting printers and computers via RS-232C or USB.
Procedures for cleaning and maintaining the balance and its components.
List of common error codes, their meanings, and basic troubleshooting steps.
Overview of optional accessories like USB interfaces, Ethernet, and battery units.
Detailed technical specifications including weighing capacity, display, accuracy, and environmental requirements.
Diagrams and measurements showing the physical dimensions of the balance.
To Next Page
General
