To Next PageTo Next PageHow to fix weighing pan error on A&D FZ-300i?
If the A&D Scales show a weighing pan error because the weight value is too light, confirm that the weighing pan is properly installed and calibrate the balance.
What does sample mass error mean on A&D FZ-300i?
If the A&D Scales display a sample mass error, it means the balance can't store the sample for counting or percent mode because it's too light. Use a heavier sample.
How to resolve unit mass error on A&D FZ-300i Scales?
If the A&D Scales display a unit mass error, it means the sample unit mass for the counting mode is too light. Add samples to reach the specified number and then press the PRINT key.
Overview of the manual's five main parts: operation, environment, functions, interface, and maintenance.
Highlights key features like internal mass for calibration, dustproof casing, fast stabilization, and multiple units.
Steps for unpacking, assembling, installing, leveling, and connecting the balance to power.
Guidelines for installing the balance in a suitable environment (temperature, humidity, light, dust, vibration).
Advice on handling static electricity, magnetic materials, temperature differences, and proper key operation.
Details available weighing units and modes, and how to select them.
Step-by-step guide for basic weighing in Gram mode using the weighing pan and tare function.
How to determine the number of objects in a sample using unit mass and ACAI function.
Mode for displaying weight as a percentage relative to a 100% reference mass.
How to enable and use the statistical calculation mode for data analysis.
Function to stabilize weight values by adjusting response rate against drafts and vibration.
Overview of calibration modes: internal mass, external weight, and calibration test.
Steps for calibrating the balance using an external weight.
Resets various parameters to factory settings, including calibration data and function switches.
Explanation of the function table structure and how to navigate it.
Setting the balance ID number for identification in GLP/GMP reports.
How to generate GLP/GMP compliant reports for calibration and weighing data.
How to enable and configure password protection for balance usage and settings.
Details on the RS-232C interface, pin assignments, and communication parameters.
Guides on connecting printers and computers via RS-232C or USB.
Procedures for cleaning and maintaining the balance and its components.
List of common error codes, their meanings, and basic troubleshooting steps.
Overview of optional accessories like USB interfaces, Ethernet, and battery units.
Detailed technical specifications including weighing capacity, display, accuracy, and environmental requirements.
Diagrams and measurements showing the physical dimensions of the balance.
General
